144+ Shed With Cleaning Supplies Storage

www.shednation.com

Introduction: Creating a Compact Cleaning Supply Shed Are you tired of tripping over mops and brooms in your garage or utility room? This guide will walk you through building a small, dedicated shed for your cleaning supplies. This project focuses on maximizing storage space in a minimal footprint, allowing you to keep everything organized and easily accessible. While this guide provides a general framework, be sure to adjust the dimensions and materials to suit your specific needs and available space. Remember to check your local building codes before starting any construction project.

Materials and Tools You'll Need Before you begin, gather all the necessary materials and tools. This will streamline the building process and prevent frustrating interruptions.

Lumber (pressure-treated for ground contact recommended): 2x4s, 4x4s, plywood or OSB sheathing, trim boards

Roofing materials: Shingles, roofing felt, drip edge

Siding materials: Wood siding, vinyl siding, or other weather-resistant material

Fasteners: Screws, nails, construction adhesive

Door hardware: Hinges, latch, handle

Cleaning supply storage solutions: Shelves, hooks, bins

Tools: Saw (circular or miter), drill, level, measuring tape, hammer, square, safety glasses, work gloves

Step 1: Building the Foundation The foundation provides a stable base for your shed. For a small shed, a simple platform foundation is often sufficient.

Cut four 4x4 posts to the desired height for your shed's base. These will act as the corner supports.

Build a rectangular frame using 2x4 lumber. The dimensions of the frame will determine the size of your shed.

Attach the 2x4 frame to the 4x4 posts using screws and construction adhesive. Ensure the frame is level and square.

Add additional 2x4 supports inside the frame, spaced every 16 inches, to provide extra stability for the floor.

Step 2: Constructing the Walls The walls provide the structural support and enclose the shed.

Cut 2x4 studs to the desired height for your shed walls.

Build the wall frames by spacing the studs 16 inches apart and securing them to top and bottom plates made from 2x4 lumber.

Frame out an opening for the door in one of the walls.

Raise the wall frames and attach them to the foundation platform using screws. Ensure the walls are plumb (perfectly vertical) before securing them.

Add sheathing (plywood or OSB) to the exterior of the walls using screws or nails. This will provide additional strength and a surface for attaching siding.

Step 3: Building the Roof The roof protects the shed from the elements. A simple sloped roof is a good option for a small shed.

Cut 2x4 rafters to the desired length and angle for your roof slope.

Attach the rafters to the top plates of the walls, spacing them 24 inches apart. Use metal rafter ties for added strength.

Sheathe the roof with plywood or OSB, ensuring the edges are flush with the rafters.

Cover the sheathing with roofing felt, followed by shingles or your chosen roofing material. Install drip edge along the edges of the roof to prevent water damage.

Step 4: Installing the Siding and Door The siding provides weather protection and aesthetic appeal. The door allows access to the shed.

Attach your chosen siding material to the exterior walls using screws or nails. Overlap the siding panels according to the manufacturer's instructions.

Install the door in the framed opening using hinges. Ensure the door swings smoothly and closes properly.

Install a latch and handle on the door.

Add trim boards around the door and windows (if any) to cover any exposed edges and give the shed a finished look.

Step 5: Organizing the Interior This is where you customize the shed for your cleaning supplies.

Install shelves along the walls to store bottles, spray cans, and other small items.

Hang hooks on the walls to hold mops, brooms, and other long-handled tools.

Use bins or containers to store rags, sponges, and other cleaning supplies.

Consider adding a small workbench or table for mixing cleaning solutions or performing other tasks.

Conclusion: Enjoy Your Organized Cleaning Supplies Congratulations! You've successfully built a compact and functional cleaning supply shed. With a little effort, you can keep your cleaning supplies organized, accessible, and out of the way. Remember to regularly maintain your shed to ensure it lasts for years to come. Consider applying a sealant or paint to protect the wood from the elements.

Shed Blueprints: Wooden Storage Shed

shedsblueprints.blogspot.com

Quality Portable Storage Sheds In Ny

fishers-storage-sheds.com

Cedarshed Studio 12x6 Shed [st126]

www.shednation.com

Related Posts by Categories